GB
Setting the display illumination
IE
CY
Adjusting the volume.
Automatic switch off ("SLEEP" function)
Programming alarm wake times
12
Press the DIMMER button
Setting options: Bright/Dimmed/Off
With the VOLUME controller
With the "Sleep" function the device switches itself off after a time lapse of
between 10 and 90 minutes.
Switch the device on and select the desired mode with the
AUX/RADIO/CD switch
Press the SLEEP button
Setting options: 90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes.
After three seconds the selected setting is saved.
Press the SLEEP button
When programming the alarm wake time you can select whether, at the
programmed time, an alarm tone should sound or the radio or CD player
should start playing. In order to programme an alarm wake time the device
must be switched off .
NOTICE
►
If, during alarm wake programming, no button is pressed for approx.
10 seconds the alarm will activate with the current settings.
Two diff erent alarm wake times (Alarm 1/Alarm 2) can be programmed.
Press the AL1.SET button
the display
5
blinks and the indicator AL 1/AL 2 appears.
Press the SKIP+/HOUR button
Press the SKIP-/MIN button
Handling and operation
to set the display illumination.
11
set the desired sound level.
18
.
19
9
repeatedly to set the desired time.
9
again to switch off the "Sleep" function.
6
/AL2.SET button
8
14
to set the hours.
13
to set the minutes.
. The time indicator in
KH 2420