To Omit Rinse And Interim Spin And The Final Spin - Miele WKR 770 WPS Operating Instructions Manual

Spinning
To omit the final spin (Rinse
hold)
 Use the Further options button to se‐
lect the
Rinse hold
is not spun after the final rinse and
remains in the final rinse water. This
helps prevent creasing if the laundry
is not going to be removed from the
drum immediately after the end of the
programme.
– To start the final spin:
The washing machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the Start/Stop button.
– To end the programme:
Use the Spin speed button to select
the setting (Without spin) and
0 rpm
press the Start/Stop button.
The water will drain away.
To omit rinse and interim spin
and the final spin
 Press the Spin speed button.
 Select the
0 rpm
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in.
In some programmes an additional
rinse is introduced with this setting.
40
setting. The laundry
setting.