To Omit Rinse And Interim Spin And The Final Spin - Miele WMV 960 WPS Operating Instructions Manual

To omit the final spin (Rinse
hold)
 Select the
Rinse hold
dry is not spun after the final rinse
and remains in the final rinse water.
This helps prevent creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
To start the final spin:
 Touch the
Change
 Select
Spin speed
speed you want.
 Start the final spin with the Start/Stop
sensor.
To end the programme:
 Touch the
Change
 Select
Spin speed
speed to
0 rpm
 Touch the Start/Stop sensor.
The water will drain away.
option. The laun-
sensor.
and set the spin
sensor.
and set the spin
(no spin).
To omit rinse and interim spin
and the final spin
 Touch the
Spin speed
 Select the
0 rpm
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in.
In some programmes an additional rinse
is introduced with this setting.
Spinning
sensor.
setting.
41