To omit the final spin (Rinse
hold)
Select the
Rinse hold
laundry is not spun after the final
rinse and remains in the final rinse
water. This helps prevent creasing if
the laundry is not going to be
removed from the drum immediately
after the end of the programme.
To start the final spin:
Touch the
Change
Select
Spin speed
speed you want.
Start the final spin with the Start/Stop
sensor.
To end the programme:
Touch the
Change
Select
Spin speed
speed to
0 rpm
Touch the Start/Stop sensor.
The water will drain away.
option. The
sensor.
and set the spin
sensor.
and set the spin
(no spin).
To omit rinse and interim spin
and the final spin
Touch the
Spin speed
Select the
0 rpm
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in.
In some programmes an additional rinse
is introduced with this setting.
Spinning
sensor.
setting.
45