To Omit Rinse And Interim Spin And The Final Spin - Miele WKG 120 Operating Instructions Manual

To omit the final spin (Rinse
hold)
 Use the Spin speed button to select
the  setting (Rinse hold). The laun-
dry is not spun after the final rinse
and remains in the final rinse water.
This helps prevent creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
– To start the final spin:
The washing machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the Start/Stop button.
– To end the programme:
Use the Spin speed button to select
the setting (Without spin) and
0 rpm
press the Start/Stop button.
The water will drain away.
To omit rinse and interim spin
and the final spin
 Press the Spin speed button.
 Select the
0 rpm
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in.
In some programmes an additional rinse
is introduced with this setting.
setting.
Spinning
35