Ecofeedback - Miele WKR 770 WPS Operating Instructions Manual

EcoFeedback

You can call up information about the
energy and water consumption of your
washing machine with the EcoFeed‐
back sensor.
The following information will appear in
the display:
– an estimate of the consumption be‐
fore the programme begins.
– the energy and water consumption to
date during the programme.
– the energy and water consumption of
the programme which has just been
run at the end of the programme.
1. Estimate
 After selecting a programme, touch
the EcoFeedback sensor.
The estimated energy and water con‐
sumption levels will be displayed as bar
charts.
Estimated consumption
Energy
Water
The more bars () visible, the higher the
energy or water consumption.
The estimate will vary depending on the
wash programme, temperature and any
options selected.
The display will change automatically or
you can return to the standard display
by touching the OK sensor.
Washing environmentally and economically
         
         
2. Actual consumption
Tip: At the end of the programme, be‐
fore opening the door, you can view the
actual amount of energy and water
used by the programme which has just
been run.
 Touch the EcoFeedback sensor.
Consumption
Energy
Water
If the door is opened or the washing
machine has switched off automati‐
cally at the end of the programme,
the data will revert to the estimated
consumption.
Total consumption setting
– This setting gives a total of the ener‐
gy consumption and water consump‐
tion to date.
See "Settings".
0,8 kWh
64 l
27