High Water Level - Miele WKR 770 WPS Operating Instructions Manual

 = Low water level
 = Medium water level
 = High water level
= Intensive rhythm

= Normal rhythm

= Sensitive rhythm

= Ultra sensitive rhythm

 = Handwash rhythm
= Carried out

– = Not carried out
The washing machine has fully elec‐
tronic controls with automatic load rec‐
ognition. It takes in the right amount of
water required for the programme de‐
pending on the amount of laundry and
its absorbency rate.
The programme sequences shown in
the chart are based on the standard
programme with a full load.
The washing machine programme se‐
quence display shows which stage of
the programme has been reached.
Programme sequence
Special features in the pro‐
gramme sequence
Anti-crease:
At the end of the programme the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
Exception: There is no anti-crease
phase in the Woollens programme.
The door can be opened at any time
during the anti-crease phase.
1)
A second rinse is carried out when a
temperature between 60°C and 90°C
has been selected. A third rinse is
carried out when a temperature below
60°C is selected.
2)
An additional rinse is carried out if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected
– the spin speed has been deselected
3)
An additional rinse is carried out if:
– the Extra rinse option is selected.
4)
Run-up to spin: A run-up to spin is
carried out before the wash process
begins to deflate down filled items.
Subsequent water intake for the main
wash is through compartment .
5)
Pre-wash: A pre-wash without deter‐
gent is carried out automatically to re‐
move dust.
61