Miele WKR770WPS Quick Start Manual

Before the first use Operating the washing machine
寮
Before using the machine for the first
time, ensure that it is correctly installed
and connected.
Please read the separate operating
instructions supplied with the appliance.
When the washing machine is switched on
for the first time with the  button, the wel-
come screen ("Willkommen") will appear.
1 2 3 4 5 6 7 8 9
Setting the language and the time of
day 1 Display with sensors 6 Extra option buttons
ĺ
Set the display language and time of day See points 10 to 15 for more informa- Various Extra option can be added to
that will appear in the display (see "Before tion. the wash programme.
using for the first time" in the operating 2 Start/Stop button 7 Programme selector
instructions). For starting the programme selected For selecting a wash programme.
and cancelling a programme once it has 8 PC optical interface
Messages started. For service technicians.
Two messages about removing the tran- 3 Temperature button 9  button
sit bars and preparing the washing machine For selecting a temperature. For switching the washing machine
for use will appear in the display. 4 Spin speed button on and off. To save energy, the wash-
ĺ
Ensure the feet of the washing machine For selecting the spin speed. ing machine will switch off automati-
are aligned and the transit bars have 5 Delay start button cally 15 minutes after the end of the pro-
been removed, and confirm the mes- For selecting Delay start. gramme / Anti-crease phase or after
sages with the OK sensor. being switched on if no other selection
is made.
Running the first programme
The TwinDos unit needs to be activated
before running the first programme.
ĺ
Please see "TwinDos" in the operating
instructions.
ĺ
Turn on the tap.
ĺ
Turn the programme selector to Cottons.
After the load appears in the display, the
Washing environmentally and economically
display changes to the standard display.
ĺ
ĺ Touch the Dos  sensor.
Select the degree of soiling set- – To get the most out of your machine, – Use the Express 20 programme for
Heavy
ting with the  sensor and confirm your load the maximum dry load for the pro- small, lightly soiled loads.
selection with the OK sensor. gramme you are using. – Modern detergents enable washing at
ĺ
Confirm the For white items option with the – When smaller amounts of laundry are reduced temperatures (e.g. 20°C). Use
OK sensor. washed, the automatic load recognition appropriate temperature settings for
ĺ
Press the Start/Stop button. system will reduce the amount of water saving energy.
ĺ
Switch the washing machine off at the and energy used.
end of the programme.
The TwinDos unit is now ready for use.
Washing
1. Preparing the laundry
ĺ
Empty all pockets.
寮
Foreign objects (e.g. nails,
coins, paper clips, etc.) can
cause damage to garments and
components in the machine.
ĺ
Sort the laundry by colour and by care label. Most gar-
10 11 12 13 14 15
ments have a textile care label in the collar or side seam.
ĺ
Pre-treat stains and badly soiled areas (see the booklet
10  sensor "Miele's guide to laundry care").
Scrolls down the list to the next option
or decreases a value.
11 OK sensor
Confirms the programme selected, a
value set or opens a sub-menu.
2. Selecting a programme
12  sensor
ĺ
Scrolls up the list to the next option or Switch on the washing machine with the  button.
increases a value.
13  Dos sensor Selecting a programme via the programme selector
ĺ
Switches on automatic detergent dis- Turn the programme selector to the required pro-
pensing. gramme.
14  Cap sensor The load for the programme selected will appear in the
Activates cap dosing via the detergent display. The standard display will then appear:
dispenser drawer.
15 EcoFeedback sensor Selecting a programme using the programme
Provides information about the energy selector at the "Further programmes" position and 3
and water consumption of the pro- the display
ĺ
gramme. Turn the programme selector to
Sensors 10 to 12 light up when the display the "Further programmes" 1 Detergent dispenser drawer
Control panel
can be operated via the sensors. setting. 2
3 Access to drain filters, pumps and
Automatic plus
appears in the display . emergency release
4 Door
ĺ
Touch the  or  sensor until the programme you want 5 Access panel for TwinDos
appears in the display. containers
ĺ
Confirm the programme with the OK sensor.
– For precise dispensing, use automatic The load for the programme selected will appear in the
detergent dispensing. display. Preset programme parameters will be displayed,
– Selecting the highest possible spin depending on the programme selected.
speed for the wash programme will
save energy when drying in a tumble
dryer afterwards.
3. Loading the washing machine
Switching on Delay start
The start of a programme can be delayed
Opening the door from 15 minutes up to 24 hours, allow-
ĺ
Reach under the door grip and ing you to make use of night-time economy
1 2
pull the door open. electricity rates, for example (see "Delay
ĺ
Unfold the laundry and load start" in the operating instructions).
loosely in the drum.
5. Adding detergent
There are several options for adding deter-
Closing the door gent.
ĺ
Make sure that no items are
caught between the door and TwinDos
the seal. – Miele 2 Phase System
The optimum amount of UltraPhase 1 and
UltraPhase 2 will be dispensed automat-
ically according to the colour mix of the
load.
ĺ ĺ
Shut the door with a gentle Press the Dos  sensor.
ĺ
swing. Use the  and  sensors to select the
dosage mix (
For white items
) and confirm your selection with the
items
OK sensor.
– Liquid detergent/Fabric softener
The most suitable agent will appear in the
display with a tick () beside it.
If both the agents present in the con-
4. Selecting programme settings
5
4
tainers are suitable (e.g. detergent for
coloured items and fabric softener), then
Selecting a temperature
ĺ
both agents will be selected.
Press the Temperature button.
ĺ ĺ
Set the temperature you want with the  and  sen- Confirm the option displayed with the OK
sors and confirm your selection with the OK sensor. sensor or select another detergent or fab-
ric softener with the  and  sensors.
Selecting a spin speed
ĺ
Press the Spin speed button.
ĺ
Set the spin speed you want with the  and  sensors
and confirm your selection with the OK sensor.
Selecting Extra options
ĺ
Press the button for the option you want.
Changing the programme sequence
ĺ ĺ
Detergent dispenser drawer Remove the laundry. Press the Temperature or Spin speed
ĺ
Pull out the 寮 ĺ button.
Check that all items have been
detergent drawer Use the  or  and OK sensors to
removed from the drum.
and add change the temperature and spin speed.
ĺ
detergent to the Check the folds
compartments. in the door seal Extra options
for any small It is possible to select or deselect the Short
articles, e.g. and Water plus Extra options up to five min-
buttons, which utes after the programme has started.
 Detergent for the pre-wash
might be lodged
 Detergent for the main wash,
It is not possible to make any changes to
there.
including Soak if selected ĺ
the programme or to cancel it if the safety
Switch the washing machine off with the
 /  Fabric softener, liquid starch or
lock has been activated.
 button.
capsules ĺ
Close the door and remove any used
CapDosing capsules which may be in the detergent
Three different types of capsule are availa- dispenser drawer. Interrupting a programme
ĺ
ble: Switch the washing machine off with the
Cancelling a programme
 Fabric care (e.g. fabric softener)  button.
ĺ ĺ
Press the Start/Stop button. Switch the washing machine back on
 Additives (e.g. detergent enhancers)
The following will appear in the display: with the  button to continue with the
 Detergent
or same programme.
For coloured Cancel programme ĺ
See "Detergent" in the operating instruc- Touch the OK sensor.
tions for more information. The suds will be pumped away. Programme
Adding or removing laundry
cancelled will appear in the display.
ĺ
Pull open the door. after a programme has started
ĺ
Remove the laundry. ĺ
Press the Start/Stop button. The follow-
Selecting another programme ing will appear in the display:
ĺ
6. Starting the programme - the
Close the door. gramme
ĺ ĺ
end of the programme
Select the programme you want. Scroll up or down the list with the  or 
ĺ
Add detergent to the detergent dispenser sensor to:
Starting the programme
ĺ ĺ drawer, if necessary. ĺ Add laundry
Press the flashing Start/Stop button. Press the Start/Stop button. Touch the OK sensor.
The door will lock (the  will appear in the The programme will stop and the door will
Changing a programme and
display to show this) and the programme unlock.
ĺ
will start. settings Pull open the door.
ĺ
Add or remove items.
ĺ
At the end of the programme Programme
ĺ Close the door.
The door is still locked during the Anti- Once a programme has started, it is no Press the Start/Stop button.
crease phase and the following will appear longer possible to select a different pro- The programme will continue.
alternately in the display: gramme.
Anti-crease and  Press the Start/Stop but- The door cannot be opened if:
ton, then unload the drum Temperature/Spin speed – the suds temperature is above 55°C.
ĺ
Press the Start/Stop button. The door will The temperature can be changed within the – the water is above a certain level.
be unlocked. first five minutes, except in the Cottons pro- – the programme has reached the Spin
ĺ
Pull open the door. gramme. The spin speed can be changed stage.
right up to the start of the final spin.
Programme chart
Cancel pro-