Appendix C: Additional Calibration Information; Installing The Calibration Software; System Requirements - Kodak PROFESSIONAL LED II 20P Operator's Manual

Appendix C: Additional Calibration

Installing the Calibration Software

September 2000
The topics covered in this section include:
•
Installing the Calibration Software
•
An overview of the KODAK Device Calibration Software
•
Advanced Features of the LED II Calibration Software
•
Installing the Densitometer
IMPORTANT: For the step-by-step procedure to calibrating the printer, see
"Calibrating the Printer" on page 2-3.
Installing the software includes installing both the Kodak Device Calibration
Software (which manages the calibration of multiple Kodak devices) and the
Calibration Software for the Kodak Professional LED II Printer 20P/20R.

System Requirements

MACINTOSH Version
•
Power MACINTOSH System 7.5 or above
•
Minimum of 35 MB free disk space
•
608 K free disk space for each of as many as six configured devices
•
256 colors at 640 x 480 spatial resolution
•
CD ROM Drive
WINDOWS NT Version
•
100 MHz PENTIUM Processor
•
64 MB Main System Memory
•
VGA Monitor (640 x 480 spatial resolution)
•
CD ROM Drive
Information
C-1