Kodak i600 Series Image Processing Manual page 53

3-36
3. Select Settings on the main Kodak Scanner window. The General
tab of the Image Settings window will be displayed.
4. Select the appropriate options on the General tab.
NOTE: If necessary, review each setting on the other tabs and
make any changes.
5. Place one representative document in the input elevator of the
scanner.
6. Click Preview to review the resulting image.
If the images are not acceptable, you can either select a different
predefined Setting Shortcut or make additional changes on the rest
of the tabs on the Image Settings window.
7. Define the desired Device settings by selecting Device on the Image
Settings window to display the Device Settings window.
8. Review each tab and select the appropriate options or actions you
want the scanner to perform
9. Select Home to return to the main Kodak Scanner window.
10. Select Save As. The Save As window will be displayed.
11. Enter a new Setting Shortcut name that is meaningful to you and
click Save.
A-61504 April 2007