Kodak i600 Series Image Processing Manual page 25

3-8
Toolbar buttons
Zooms In: enlarges the image that is currently being displayed
in the preview area.
Zooms Out: reduces the image that is currently being displayed
in the preview area.
Rotate Outline: rotates the outline 90 degrees. This is only
available if the rotated outline will fit in the scanner's maximum
width.
Center Outline — adjusts the X origin of the outline such that
the outline is centered within the scanner's maximum width.
Preview Quality: selects the quality of the scanned image.
Normal: displays acceptable image quality at a lower resolution.
High: displays the most accurate representation of the actual
image. The image displayed in the preview area is a good
representation of what the final image will look like.
Units: selects the unit of measurement for the scanner; this
includes the preview area and any size-related options. The
Units options are: Inches, Centimeters and Pixels.
Preview area
The main purpose of the preview area is to display a sample image that
is based on your current shortcut setting. An image will be displayed in
this area after a preview scan has been performed.
• Outline: If you choose Document: Manually Select or Image: Part
of a document on the Size tab, the preview area will also show the
current Outline selections. If the outline does not align with your
preview image, you may use the mouse to adjust the size and
location of the outline. As the mouse cursor moves around the
outline, the cursor will change indicating that you can adjust the
outline by pressing and holding the left mouse button.
- Move: place the mouse cursor within the outline to adjust the
location of the outline.
- Corner: place the mouse cursor over one of the corner
graphics to adjust two sides at the same time.
- Side: place the mouse cursor over one of the side graphics
to adjust that side.
Home — returns you to the main Kodak Scanner window.
Device — displays the Device Settings window.
A-61504 April 2007