Kodak i600 Series Image Processing Manual page 2

1 Introduction
About this manual
A-61504 April 2007
The Kodak i600 Series Scanners is a high-volume production scanner
which includes image processing technology that can improve image
quality and sometimes make the reproduction better than the original.
You can use the ISIS Driver or TWAIN Datasource (both are available
on the CD that is included with the scanner) or Kodak Capture Software
to enable image processing.
Other popular scanning applications are also compatible with these
scanners, however these applications may not be able to access all of
the image processing options. Please refer to your vendor's
documentation for specific information.
The Kodak i600 Series Scanners provides both color/grayscale and
black and white scanning simultaneously with throughput speeds up to
200 ppm.
This manual provides the following:
Chapter 1, Introduction includes a brief summary of the Kodak i600
Series Scanners.
Chapter 2, Best Practices includes information to use when setting up
applications, recommendations on how to handle jam recoveries,
image addressing information, controlling print streams, electronic color
drop-out and much more.
Chapter 3, Using the TWAIN Datasource includes information on using
the dialog boxes presented by the TWAIN Datasource and an
explanation of the fields on each tab.
Chapter 4, Using the ISIS Driver includes information on using the tabs
presented by the ISIS driver and an explanation of fields on each tab.
Appendix A, TWAIN Image Processing Terminology — the TWAIN
Datasource for the Kodak i600 Series Scanners has been updated to
include new terminology for traditional Kodak image processing
functions. See this appendix for a comparative chart to map between
terms.
NOTE: The scanned images used in this guide were selected for the
challenges presented to a typical scanner due to the low-
contrast characteristics of the images.
1-1