Advertisement
Quick Links
BiPAC 74xx series
VoIP ADSL2/2+ Modem/Routers
VoIP
Quick Install Guide
This guide covers the initial VoIP
set-up only. Please contact your
VoIP service provider for their
full VoIP setting. This guide is
based on the Billion BiPAC 7404
VGP so be aware that for other
models in the 74xx series the
screen shots may vary slightly.
CD supplied.
www.billion.uk.com
Advertisement
Related Manuals for Billion BiPAC 74xx series
Summary of Contents for Billion BiPAC 74xx series
- Page 1 Please contact your VoIP service provider for their full VoIP setting. This guide is based on the Billion BiPAC 7404 VGP so be aware that for other models in the 74xx series the screen shots may vary slightly.
- Page 2 This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product.
- Page 3 Setting up the Voipuser.org VoIP service on Billion VoIP routers Setting up VoIP accounts on the Billion VoIP series routers is easy, and usually only involves entering the VoIP server address, port number (usually 5060 for SIP) and your username and password.
- Page 4 2) Then enter the username and password to log into the router (default: admin / admin) and click ‘OK’. 3) You have now successfully logged onto the router’s ‘Status’ page. Now click on ‘VoIP’ on the left hand side menu bar. 4) Click on ‘General Settings’.
- Page 5 5) On the ‘General Settings’ page you will need to enable SIP if it is not already enabled, and input the settings as shown below. Usually the only field you will need to complete is the Registrar Address field (in this case: sip.voipuser.org). Scroll down and click on ‘Apply’ at the bottom. 6) Next click on ‘Phone Port’...
- Page 6 7) On the ‘Phone Configuration’ page you will see phone port 1 and 2. Click ‘Edit’ on Phone Port 1, as we will only setup one phone port in this example. (For the Billion 7401VGP you will only have 1 phone port option.)
- Page 7 9) You should now be back on the ‘Phone Configuration’ page and you should see that ‘Phone Port 1’ is now shown as ‘Registered’. You have now successfully setup your Voipuser account on your Billion VoIP router. The final step is to save your configuration by pressing ‘SAVE CONFIG’ at the bottom right of your screen.
- Page 8 Telephone Support for Internet access ONLY is available during office hours from Mon-Fri 10am–5pm on 0870-8501528. If you are successfully connected to the Internet and have a support query you can also contact support at: www.billion.uk.com/esupport...