Configuration - wtw pH 315i Operating Manual

pH 315i
4.4

Configuration

You can adapt the following setting to your individual requirements (the
default setting is marked in bold):
Display during the
pH calibration
1 Switch off the measuring instrument.
2 Press the <M> key and hold it down.
3 Press the <ON/OFF> key.
Display test appears briefly on the display. Afterwards, the
measuring instrument switches automatically to the setting of
the display during the pH calibration.
ISE
UpH
S
1 0 C A
Time Baud
d i s
Day.Month No.
Year Ident
Auto
AutoCal DIN Store
LoBat
AutoCal TEC ConCal
4 Select the required display during the pH calibration with
<CAL>.
mV: Display of the current electrode voltage
/pH: Display of the buffer nominal value.
5 Confirm with <RUN/ENTER>.
The measuring instrument automatically switches to the mea-
suring mode.
Buffer nominal value,
current electrode voltage
mol/L
L
mV/pH /pH
% ppm
mg/L
°F
p
%
TP
°C
CalError TempError
ARng AR RCL
Operation
29