Table of Contents
Advertisement
FA30
Motherboard User Manual /
Engineering Spec.
Chapter 2 Installations
2.1 I/O Equipment Installation
2.1.1 12V DC-IN
The Motherboard allows plugging 12V DC-IN with pin-header on board without
additional power module converter.
2.1.2 Isolated expansion port
There are 8pin isolated expansion port on board which can support two 24V DC
device and 3pin GPIO.
2.1.3 Ethernet interface
The Motherboard is equipped with two RJ-45 jack which is fully compliant with the
10/100/1000 Mbps Ethernet protocol compatible. It is supported by major network
operating systems.
2.1.4 USB ports
FA30 have four USB port which two as A-type connector and others as pin-header.
The USB ports support hot-plug connection.
2.1.5 Isolated CAN BUS
Two CANBUS combined in one connector and with isolated design.
2.1.6 Micro USB ports
Two Micro USB connectors which one for OTG USB 2.0 and other is debug port.
2.1.7 Audio function
The audio interface includes three pin-header connectors on board: two for Stereo
Speaker out (L/R) and one Mic in.
2.1.8 LVDS connector
FA30 can support LVDS interface panel and resolution up to 1920*1200. For more
information please contact local distributor or sales representative.
FA30 Motherboard User Manual
8
Advertisement
Table of Contents
