To Change The Remote Escape Character - Multitech MultiModem MT5634ZPX-PCI-U/NV User Manual

MultiModemZPX User Guide

To Change the Remote Escape Character

To further improve security, you can change a remote modem's remote configuration escape character
either locally or remotely. The remote configuration escape character is stored in register S9. The factory
default is 37, which is the ASCII code for the percent character (%). Setting S9 to 0 (zero) disables remote
configuration entirely.
CAUTION: If you do this remotely, you won't be able to change it back remotely.
1. Establish a remote configuration link with the remote modem as described in "Basic Procedure."
2. Type ATS9=n, where n is the ASCII code for the new remote configuration escape character, and
then press E .
NTER
3. Save the new value by typing AT&W and pressing E
4. Type ATO and press E to exit remote configuration.
NTER
3 Remote Configuration
.
NTER
12