Transferring Software From Luminaire To Luminaire - Philips VARI-Lite VL4000 User Manual

❋
VARI LITE - VL4000 S
Step 7. Click on bin file for luminaire to be updated (for example, SVL_080812.bin) as
highlighted in
NOTE: Select High Speed
option when uploading to
16 or less luminaires.
Step 8. As indicated in
a. During upload, PEGASUS and luminaire screens will display a progress bar showing
b. Once progress bar shows completed on computer screen, wait approximately one minute
c. Once the firmware upload is complete, the VARI❋LITE luminaire(s) will automatically
Step 9. Close PEGASUS Software using Close button at bottom of program screen.
Note: You can confirm the software version in the luminaire menu.

Transferring Software From Luminaire to Luminaire

It is possible to transfer specific software versions between luminaires. As in the case of installing new
software versions, multiple luminaires can be programmed at the same time if they are data linked
together (refer to
can be updated at once.
Hardware Requirements
Data cables used in this process must have two twisted pairs and a shield. It is also recommended that
cables meet all other USITT DMX specification requirements. Refer to
60
L U '
POT UMINAIRE SER S
Figure 3-11.
Figure 3-11: bin File Selection
3-11, click on Update Devices to start upload.
Figure
upload status.
before moving to next step. Note, The progress bar on luminaire LCD display may
continue for a short time after computer progress bar shows completed.
recalibrate.
"Connecting Data and Power" on page
03 Feb ru ary 201 5
M
ANUAL
24), however a maximum of 32 luminaires
Progress Bar
"Data Cables" on page 15.
02 .9 704 .00 01 D