Philips VARI-Lite VL4000 User Manual page 107

Note: For the standard load of rotating gobos, refer to
"Rotating Gobo Wheel 2" on page 33
Step 4. At rotating gobo wheel, slowly rotate wheel by hand until gobo to be removed is visible on
assembly.
Step 5. Grip gobo assembly and pull up to remove from luminaire head.
Step 6. Before installing gobo assembly into rotating gobo wheel assembly, make note of
relationship between carrier and main gear slot as illustrated in
a. Align gobo assembly gear timing marks WITH...
b. Slot in main gear on gobo wheel assembly. You may have to rotating gear by hand for
02.97 04.000 1 D
alignment.
Figure A-8: Rotating Gobo Wheel - Gobo Clocking
03 Feb ru ary 201 5
T
ROUBLESHOOTING AND
"Rotating Gobo Wheel 1" on page 32
Rotating Gobo Assembly
Timing Marks
- Continued Next Page -
M
AINTENANCE
Figure A-8.
Rotating Gobo Wheel Assembly
(a) Align gobo assembly timing
marks with...
(b) Slot in main gear in
gobo wheel assembly
Slot
A
or
89