Table of Contents
Advertisement
TOP PANEL: WIRELESS RECEIVER CONTROLS
RECVR 2
RECVR 2
O/I
POWER/
RECVR 1
POWER
RED: LOW BATT
GREEN: ON
CHARGE
RED: CHARGING
GREEN: FULL
1
RECVR 1
1. WIRELESS RECEIVER 1: One or
two wireless receiver modules are
located at the top panel.
2. CHANNEL DISPLAY: An LED
readout of the receiver module
indicates which channel you are
on.
3. CHANNEL CONTROL (1-16): The
left button increments the channel
number (1-16). Each touch of the
button moves the number up one
until it gets to sixteen. The right
button decrements the channel
number (16-1).
4. RF CHANNEL A/B INDICATOR:
The "A" LED lights up indicating
the A channel tuner is receiving
the strongest RF signal. The "B"
LED lights up indicating the "B"
channel tuner is receiving the
strongest RF signal.
2
3
5. TRANSMITTER LOW BATTERY
6. SCAN: Press this button to auto-
7. SQUELCH LEVEL ADJUSTMENT:
5
4
INDICATOR: This LED will light
to indicate the batteries in the
corresponding transmitter are
low.
matically select a channel that is
free from interference.
Covered with a plastic cap, the
squelch is adjusted at the factory
to provide the best signal level
and minimum noise. There is no
need to adjust the squelch level
in the field.
6
7
7
Advertisement
Table of Contents
