Table of Contents
Advertisement
3. CHANNEL SELECTION: HANDHELD
TRANSMITTER
Once a channel has been selected
on the receiver, you now need to
select that same channel on the
handheld transmitter. If you have a
belt-pack transmitter, go to page 19
for channel selection instructions.
1. Turn on the microphone by sliding
the power button on the barrel
forward. The LED will flash red.
2. Use a screwdriver to set the
channel switch to the current
channel shown on the RECVR
screen.
Transmitters and receivers are
available in 3 different frequency
groups (620, 640, 660 MHz). Verify
that the receiver frequency matches
the letter code on the silver sticker
in the battery compartment of the
transmitter.
14
Channel
Model Number: HM016
Serial Number
HM01614324024
FREQUENCY 660 MADE IN TAIWAN
Frequency
Same
Advertisement
Table of Contents
