Lightspeed Delta PA User Manual page 27

OPTIONAL SPEAKER STAND AND BRACKET
ASSEMBLY
1. Position the legs of the speaker stand for
the appropriate height and width for the
application.
2. Extend the speaker stand shaft to desired
height.
3. Insert safety pin at an appropriate level.
(see figure 1)
5. Place the Delta PA (DPA) amplifier upside
down on a table top.
6. Locate the 3 screw holes on the botom of
the amplifier.
7. Align the screw holes with the 3 holes on
the bracket as shown in figure 2.
8. With the provided screws, attach the
bracket to the DPA.
9. Place the assembled DPA with bracket
onto the speaker stand as shown in figure
3.
10. Ensure the the top of the speaker stand is
touching the top plate of the bracket..
figure 1
figure 2
figure 3
27