Table of Contents
Advertisement
11. REPLACING BATTERIES IN BELT-PACK
TRANSMITTER
Replacing the Batteries:
1. Open the battery compartment
door by depressing the latches on
each side of the transmitter.
2. Remove or replace the batteries
and snap the door shut. The
belt-pack requires two AA sized
batteries.
3. Note the polarity in the battery
compartment.
IMPORTANT: Replace batteries with
the same type, (alkaline or NiMH),
that were installed in your belt-pack
transmitter. Lightspeed recommends
Panasonic or Energizer batteries.
Duracell may not work properly.
22
Advertisement
Table of Contents
