Set-Up & Use; Section 3 - Lightspeed Delta PA User Manual

SECTION 2:
SET-UP & USE
1. CONNECTING THE DELTA PA RECEIVER
TO A POWER SUPPLY
Note: When the DELTA PA is received,
plug in the power supply and let charge
overnight before using.
1. Locate the power supply.
2. Insert the DC connector into the
"POWER INPUT" connector on the
bottom of the DELTA PA and plug
the other end to an electrical
outlet.
3. Turn the POWER/RCVR1 knob
clockwise to turn the system
on.
4. The green LED light next to the
knob will illuminate to confirm the
system is powered up.
*Note: The DELTA PA can operate
on either DC power or battery
power.
RED: LOW BATT
CHARGE
RED: CHARGING
RECVR 2
RECVR 2
O/I
POWER/
RECVR 1
POWER
GREEN: ON
GREEN: FULL
RECVR 1
RECVR 2
RECVR 2
O/I
POWER/
RECVR 1
POWER
RED: LOW BATT GREEN: ON
CHARGE
RED: CHARGING GREEN: FULL
11