Lightspeed Delta PA User Manual page 13

2B. USING MORE THAN ONE DELTA PA
RECEIVER
If you have a second DELTA PA:
A) Verify that RECVR 1
transmitter and receiver 1 are on
and set to the same clear channel.
B) Make sure the transmitter for
RECVR 2 is turned off.
C) Press the SCAN button on the
RECVR 2.
D) After the RECVR 2 receiver
selects a clear channel, set
the RECVR 2 transmitter
(handheld or belt-pack) to the
selected channel. See pages 14
and 19 for instructions.
3. Manual Channel Selection:
A) Pressing the UP CHANNEL
button increases the channel
number by one.
B) Pressing the DOWN CHANNEL
button decreases the channel
number by one.
C) Once a frequency is selected,
you will need to select the same
channel on the corresponding
transmitter (handheld or belt-
pack). See pages 14 and 19 for
instructions.
4. Set the Receiver 1 and Receiver 2
channels on the second DELTA PA
to be the same as the first DELTA
PA.
Channel 2
13