Ozito CMS-1810 Instruction Manual
  1. Manuals
  2. Brands
  3. Ozito Manuals
  4. Saw
  5. CMS-1810
  6. Instruction manual
Ozito CMS-1810 Instruction Manual

Ozito CMS-1810 Instruction Manual

Compound mitre saw
Hide thumbs
Table of Contents

Advertisement

Quick Links

COMPOUND
MITRE SAW
255mm (10")
INSTRUCTION MANUAL
SPECIFICATIONS
Motor:
1800W
Input:
230-240V ~ 50Hz
No Load Speed:
4,500/min
Blade:
Ø255mm x 25.4 x 36T
Mitre Angle:
0-45° left & right
Bevel Angle:
0-45° left
Max. Cutting Capacity:
Mitre 0° x Bevel 90°:
75x135mm
Mitre 45°x Bevel 90°:
75x95mm
Mitre 0°x Bevel 45°:
45x135mm
Mitre 45°x Bevel 45°:
45x95mm
ozito.com.au
WHAT'S IN THE BOX
Compound Mitre Saw
Dust Bag
Material Support Bars
Material Clamp
Hex Key 6mm /
Carbon Brush Set
CMS-1810

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CMS-1810 and is the answer not in the manual?

Questions and answers

Related Manuals for Ozito CMS-1810

Summary of Contents for Ozito CMS-1810

  • Page 1 0-45° left & right Bevel Angle: 0-45° left Max. Cutting Capacity: Mitre 0° x Bevel 90°: 75x135mm Mitre 45°x Bevel 90°: 75x95mm Material Clamp Mitre 0°x Bevel 45°: 45x135mm Mitre 45°x Bevel 45°: 45x95mm ozito.com.au Hex Key 6mm / Carbon Brush Set CMS-1810...

  • Page 2: Know Your Product

    KNOW YOUR PRODUCT SETUP & PREPARATION MITRE SAW 1. ASSEMBLY 1. Material Support Bars 7. Mitre Lock Handle 2. Material Clamp 8. Head Locking Pin Release cutting head from its transport position. 3. Rear Fence 9. Spindle Lock Button 1. While holding the head of the saw down release the lock down knob.

  • Page 3: Bench Mounting

    2. SET-UP AND ADJUSTMENTS Bench Mounting Bevel Angle Adjustment The base of the saw has four 1. Loosen bevel angle 2. Tilt the cutting head to bench mounting holes that lever. the desired bevel angle as can be used to mount it to a shown by the bevel angle workbench or mitre saw stand.

  • Page 4: Operation

    To obtain good cuts when performing bevel or compound side of the saw. cuts the workpiece should be clamped. When performing a bevel or compound cut, the material clamp should be positioned on the right hand side of the fence. CMS-1810...

  • Page 5: Maintenance

    THAN THE STATED CAPACITY OF THE MITRE SAW. IT MIGHT Note: Ozito Industries will not be responsible for any damage or COME INTO CONTACT WITH THE BLADE GUARDS AND RISK injuries caused by the repair of the mitre saw by an unauthorised PERSONAL INJURY OR DAMAGE TO THE MITRE SAW.
  • Page 6 83 84 75 76 48 49 50 72 73 65 66 67 68 53 54 55 The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Item Description Part No.

  • Page 7: Electrical Safety

    Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.

  • Page 8: Warranty

    • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. • Professional, industrial or high frequency use. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 0712...

Table of Contents