Removing The Reactors (Acl1, Acl2, Acl3) - Mitsubishi Electric Mr.Slim PUHZ-RP35VHA3 Service Manual

OPERATING PROCEDURE

13. Removing the reactors (ACL1, ACL2, ACL3)

(1) Remove the service panel. (See figure 1.)
(2) Remove the top panel. (See figure 1.)
(3) Remove the 6 screws, screw
the front panel and remove the front panel. (See photo 3.)
(4) Remove the 2 screws, screw
that fix the separator, screw
screw 1 from the bottom of the separator, and tilt the
separator to the side of the fan motor slightly.
(See photo 17.)
(5) Disconnect the lead wires from the reactor and remove the
2
4 screws, screw , that fix the reactor to remove the
reactor. (See photo 18 and 19.)
Note 1: The reactor is very heavy (4kg)!
Be careful when handling it.
Note 2: The reactor box is also removable.
Photo 18
Propeller
Reactors
8 9
and (5 10), that fix
0 1
and (both 4 10),
0
from the valve bed and
Reactor box
Electrical
parts box
4-way
valve
Reactor box
149
PHOTOS
Photo 17
Reactor box Separator
Photo 19
Screw
Electrical parts box
Screw
Valve
bed
1
Screw
2
0