Set-Up; Connect The Base; Handset Set-Up - SAGEMCOM D350 User Manual

6

Set-up...

Connect the base

Before making connections, please see the safety instructions at the start of the booklet.
1 Take the telephone connection cord, click it into its socket.
2 Connect the other end of the cord to the telephone socket.
3 Take the power adapter.
4 Connect the end of the cord to the base and the power adapter to
the wall socket.

Handset set-up

1
4
1 Take the batteries provided in the packaging.
2 Turn over your handset
3 Insert the batteries one by one according to their polarities as indicated in the illustration.
4 Fit the hatch to the handset.
5 The screen turns on and a welcome message in all the languages supported by the telephone is
displayed on the screen, press
6 Select the country where you will use the phone by pressing the top or the bottomof the
browser and press
7 Place your handset on its charger and fully charge the batteries.
*
Depending on version
2
+
-
-
+
5
-
+
- +
.*
.*
4
3
3
-
+
+
-
+
-
15 H
1
2