Toyota RAV4 Owner's Manual page 593

Set the new light bulb.
5
Align the 3 tabs on the light bulb
with the mounting, and insert.
Turn it clockwise to set.
Set the connector.
6
After installing the connector,
shake the bulb base gently to
check that it is not loose.
Set the connector and install
7
the cover.
Before installing the cover, turn
the headlight low beams on
once and visually confirm that
no light is leaking through the
mounting.
For the right side only: Move the washer tank inlet and install the
8
securing clip.
RAV4_OM_OM42873E_(EE)
6-3. Do-it-yourself maintenance
593
6