Toyota RAV4 Owner's Manual page 354

354
4-5. Using the driving support systems
The Blind Spot Monitor function is operational when

 The BSM main switch is set to on
 Vehicle speed is greater than approximately 16 km/h (10 mph)
 The Blind Spot Monitor will detect a vehicle when
 A vehicle in an adjacent lane overtakes your vehicle.
Another vehicle enters the detection area when it changes lanes.

 Conditions under which the Blind Spot Monitor function will not detect a
vehicle
The Blind Spot Monitor function is not designed to detect the following types
of vehicles and/or objects:
 Small motorcycles, bicycles, pedestrians, etc.
 Vehicles traveling in the opposite direction
Guardrails, walls, signs, parked vehicles and similar stationary objects

 Following vehicles that are in the same lane
 Vehicles driving 2 lanes across from your vehicle
*
: Depending on conditions, detection of a vehicle and/or object may occur.
RAV4_OM_OM42873E_(EE)
*
*
*
*