Toyota RAV4 Owner's Manual page 275

Turn signals can be operated when

Vehicles without a smart entry & start system

The engine switch is in the "ON" position.
Vehicles with a smart entry & start system

The engine switch is in IGNITION ON mode.
 If the indicator flashes faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned
out.
 If the turn signals stop flashing before a lane change has been per-
formed
Operate the lever again.
 To discontinue flashing of the turn signals during a lane change
Operate the lever in the opposite direction.
 Customization
The setting of the turn signals flash during a lane change can be changed.
(Customizable features: P. 734)
RAV4_OM_OM42873E_(EE)
4-2. Driving procedures
275
4