Errors While Scanning; User Preferences Default Parameters - Symbol LS2208 Product Reference Manual

4 - 2 Symbol LS2208 Product Reference Guide

Errors While Scanning

Unless otherwise specified, if you make an error during a scanning sequence, just re-scan the correct parameter.

User Preferences Default Parameters

Table 4-1 lists the defaults for user preferences parameters. If you wish to change any option, scan the appropriate
bar code(s) provided in the User Preferences section beginning on
NOTE See
miscellaneous default parameters.
User Preferences Default Table
Table 4-1
User Preferences
Set Default Parameter
Beeper Tone
Beeper Volume
Power Mode
Laser On Time
Beep After Good Decode
Timeout Between Decodes
Time-out Between Same Symbol
Time-out Between Different Symbols
Appendix A, Standard Default Parameters
Parameter
page 4-3.
for all user preferences, hosts, symbologies, and
Default
All Defaults 4-3
Medium 4-4
High 4-5
Continuous On 4-6
3.0 Sec 4-7
Enable 4-8
0.6 sec 4-9
0.2 sec 4-9
Page
Number