Setting; Foot Pedal Function; Metronome Tone; Metronome Pattern - Yamaha Harmony Director HD-200 Owner's Manual

Setting

With this function, you can change the setting.
Press the [SETTING] button to change the HARMONY display to
SETTING display.
Then the SETTING indicator is lit.
Press the [NOTE SELECT] button to move the cursor, then change
the setting by using the data entry dial or data entry buttons [–], [+].

Foot Pedal Function

Press the note select button [C] to move the cursor to foot pedal position. Then change the setting by using the
data entry dial or data input buttons [–], [+].
Function
Volume
Hold
Start/Stop

Metronome Tone

Press the note select button [A] to move the cursor to metronome tone position, change the setting by using the
data entry dial or data entry buttons [–], [+].
Setting
Peck Peck
Click Click
Beep Beep

Metronome Pattern

Press the note select button [B] to move the cursor to metronome pattern position, change the setting by using
the data entry dial or data entry buttons [–], [+].
Setting
All All
Alternate Alternate
18
Display
Volume Master volume
Hold [HOLD] button
Start/Stop Start and stop the metronome
Display
Same voice as the HD-81 and Hd-100
Mechanical metronome voice
Electrical metronome voice
Display
Every beat will sound.
The first beat will not sound but the remaining beats will.
C Foot Pedal:Volume
Balance
C# Eb
Low: O M-L:
Movement
Voice
Movement
A Metro Sound:Peck
B Pattern:All
v1.OO
F# G# Bb
O Mid: O M-H: O High: O