Sony Handycam CCD-TRV107 Service Manual page 10

CCD-TRV107/TRV108/TRV308/TRV408/TRV608
Self-diagnosis Code
Block Detailed
Function Code
E 6 1 0
E 6 1 1
E 6 2 0
E 6 2 0
*1: STEADY SHOT model (CCD-TRV308/TRV408/TRV608)
Symptom/State
Difficult to adjust focus
0
(Cannot initialize focus.)
Zoom operations fault
0
(Cannot initialize zoom lens.)
Handshake correction function does not
0 work well. (With pitch angular velocity
sensor output stopped.)
Handshake correction function does not
1 work well. (With yaw angular velocity
sensor output stopped.)
Inspect the lens block focus reset sensor (Pin qs of CN301 of VC-
272 board) when focusing is performed when the control dial is
rotated in the focus manual mode and the focus motor drive circuit
(IC301 of VC-272 board) when the focusing is not performed.
Inspect the lens block zoom reset sensor (Pin qf of CN301 of VC-
272 board) when zooming is performed when the zoom switch is
operated and the zoom motor drive circuit (IC301 of VC-272 board)
when zooming is not performed.
Inspect pitch angular velocity sensor (SE750 of SI-033 board)
peripheral circuits. *1
Inspect yaw angular velocity sensor (SE751 of SI-033 board)
peripheral circuits. *1
— 10 —
Correction