Replacing The Front Audio And Usb Assembly - Lenovo ThinkCentre M83 Hardware Maintenance Manual

Machine types: 10a0, 10a1, 10a2, 10a3, 10a4, 10a5, 10a6, 10a7, 10a8, 10a9, 10aa, 10ab, 10be, 10ag,10ah, 10aj, 10ak, 10al,10am, 10an, 10df, 10dg, 10dh, 10dj, 10e8, 10e9, 10ea, and 10eb
Hide thumbs Also See for ThinkCentre M83:
Table of Contents

Advertisement

7. Pull on the tips of the rubber mounts until the rear fan assembly is secured in place.
Figure 75. Installing the rear fan assembly
8. Connect the rear fan assembly cable to the system fan connector on the system board.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 156.

Replacing the front audio and USB assembly

Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Safety information" on page 1.
This section provides instructions on how to replace the front audio and USB assembly.
To replace the front audio and USB assembly, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the computer cover. See "Removing the computer cover" on page 93.
3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 94.
4. Locate the front audio and USB assembly. See "Locating major FRUs and CRUs" on page 70.
Chapter 8
.
Replacing FRUs (machine types: 10A0, 10A1, 10A6, 10A7, 10AG, 10AK, 10AL, and 10BE)
135

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkcentre m93pThinkcentre m93

Table of Contents