Table of Contents
Advertisement
Ready
indicator
(green)
Rapid blinking alter-
nately
Off
Indicator Messages
Error
Condition
indicator
(orange)
No media in the tray
specified in the printer
driver.
Media size error
If the "Auto Continue"
option has been acti-
vated in the Status Dis-
play, the sheet already
fed in, is automatically
ejected after a predeter-
mined time.
Waiting for the Manual
Duplex.
Waiting for a proof print
Slow blink-
Paper empty
ing
Action
Load the appropriate
type of media into
Tray 1 or the manual
feed tray, and then
press the Cancel but-
ton (less than 5 sec-
onds.)
Load the appropriate
size media into Tray 1
or the manual feed
tray, and then press
the Cancel button
(less than 5 seconds.)
Reload the media so
the second side can
be printed, and then
press the Cancel but-
ton (less than 5 sec-
onds.) (Refer to the
"Manual Duplexing"
on page 42.)
Press the Cancel but-
ton (less than 5 sec-
onds) if the proof print
is acceptable to con-
tinue the print job. If it
is not acceptable, hold
down the Cancel but-
ton for more than 5
seconds to cancel the
current job.
Load media into Tray
1 or the manual feed
tray, and then press
the Cancel button
(less than 5 seconds.)
63
Advertisement
Table of Contents
