Installation Of Extension Card - Fujitsu xg0224 Safety And Installation Manual

Safety and Installation Guide
Precautions
When putting on rack mounting brackets, make sure to use special screws included in the 19" rack brackets set. If other
screws are used, it may break. Also, make sure to use cross slot screwdriver corresponding to the screw thread.
3. Fix the switch that rack mounting brackets are put at the procedure 2.
Installation screw
Precautions
Pre-occupied devices in the upper and/or lower row of the rack may interfere with the power cable of the switch from
being properly installed. In that case, plug the power cable to the switch before install it in the rack.
2.2.2

Installation of Extension Card

The extension cards can be installed to the switch as optional.
Below describes how to install each extension card.
Installation of SFP+ Extension Card / CX4 Extension Card
Below describes the case of SFP+ Extension card.
1. Turn off the power of the switch.
Caution
Do not install/uninstall the extension cards with the power on. It may cause trouble.
2. Loosen the screws on the extension slot and remove the cover panel.
12
Chapter 2 Installation
Installation