EPOX EP-3VBA User Manual page 36

BIOS
VGA:
When set to On (default), any event occurring at a VGA port will awaken a
system which has been powered down.
LPT & COM:
When set to On (default), any event occurring at a COM(serial)/LPT (printer)
port will awaken a system which has been powered down.
HDD & FDD:
When set to On (default), any event occurring at a hard or floppy drive port
will awaken a system which has been powered down.
DMA/master:
When set to On (default), any event occurring to the DMA controller will
awaken a system which has been powered down.
RTA Alarm Resume:
When set to Enable rta alarm resume, you could set the date (of month) and
timer (hh:mm:ss), any event occurring at will awaken a system which has been
powered down.
Modem Ring Resume:
When set to Enabled, any event occurring to the Modem Ring will awaken a
system which has been powered down.
Primary INTR:
When set to On (default), any event occurring at will awaken a system which
has been powered down.
Page 4-14
EP-3VBA