Power Button Board - HP ZBook 17 G2 Maintenance And Service Manual

5. Remove the fingerprint reader (4).
Reverse this procedure to install the fingerprint reader.

Power button board

Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service cover (see
6. Remove the optical drive (see
hard drive on page
7. Remove the keyboard (see
8. Remove the top cover (see
Remove the power button board:
1. Turn the top cover upside down with the front toward you.
2. Release the power button board cable through the opening in top cover (1).
Battery on page 45)
Service cover on page
Optical drive on page
58).
Keyboard on page
Top cover on page
47).
56) or upgrade bay hard drive (see
61).
71).
Component replacement procedures
Spare part number
733636-001
Upgrade Bay
79