Top Cover - HP ZBook 17 G2 Maintenance And Service Manual

Top cover

Description
Top cover
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service cover (see
6. Remove the optical drive (see
hard drive on page
7. Remove the keyboard (see
NOTE: When replacing the top cover, be sure that the following components are removed from the
defective top cover and installed on the replacement top cover:
●
Multifunction board (see
●
Speakers (see
●
Fingerprint reader (see
●
Power button board (see
Remove the top cover:
1. Close the computer.
2. Turn the computer upside with the front toward you.
Battery on page
Service cover on page
Optical drive on page
58).
Keyboard on page
Multifunction board on page
Speakers on page 77)
Fingerprint reader on page
Power button board on page
45).
47).
56) or upgrade bay hard drive (see
61).
75)
78)
79)
Component replacement procedures
Spare part number
735587-001
Upgrade Bay
71