Nortel BCM50 Feature User Manual page 11

Telephone features
Ring again
Ring type
Ring volume
Run/stop
Saved number
redial
Service
schedules
Ringing
services
Restriction
services
Routing
services
FEATURE 2
Monitor a busy or unanswered telephone, or a busy line pool within your
system. Ring Again signals you to call back when the telephone or line
pool becomes available.
FEATURE *6
Select a distinctive ring to help differentiate between your telephone from
others nearby.
1. Press FEATURE *6.
2. Enter the ring type number (1 to 4).
3. Press HOLD.
FEATURE *80
Make your telephone ring so that you can adjust the volume. You also can
adjust the volume any time your telephone rings.
FEATURE *9
Store more than one autodial number or external carrier feature code on
one memory button by inserting a break point between numbers or codes.
The first press of the button dials the first number or code; the next press
dials the next number or code. You can program up to four numbers or
codes separated by break points.
FEATURE 67
Save a number to redial later. Enter the code while you are on a call that
you have dialed to save the number. Enter the code when you are not on a
call to redial the saved number.
FEATURE 870
Display the modes that have been turned on at a designated control set.
FEATURE 871
Turn on one of six schedules for alternative ringing and call answering
arrangements from a designated control telephone.
FEATURE 872
Turn on one of six services for restrictions on particular lines or telephones
from a designated control telephone. You musth enter a password.
FEATURE 873
Turn on one of six services for routing on particular lines or telephones
from a designated control telephone. You must enter a password.
Cancel: FEATURE #2
Cancel: FEATURE #871
Cancel: FEATURE #872
Cancel: FEATURE #873
Page 11