Installing The Os - Fujitsu Primergy Econel 100 S2 Start Manual

7

Installing the OS

This section explains the procedures to install the OS using ServerStart.
1
Turn on the server and insert
PRIMERGY Startup Disc immediately.
ServerStart start up. The select-media window for
the configuration file appears.
2
Insert the ServerStart floppy disk sup-
plied with the server. Click [Continue].
ServerStart initialization process starts. After com-
pletion, the license agreement window appears.
3
Click [Accept].
The [Welcome to ServerStart] window appears.
4
Select [Quick Installation] and click
[Next].
The [Select the Boot Controller and Boot Disk]
window appears.
5
Set configuration of the RAID and
disks and click [Next].
To install the OS while maintaining the estab-
lished RAID environment
Select [Logical Disk 0] and specify partition size to
be created. One partition can be created.
Select [Logical Disk 0] even if the RAID is not re-
quired be created.
To configure RAID
Select [create new RAID array with one partition]
and specify the RAID level to be configured and
the size of the partition. All existing RAID will be
deleted. Also, one partition can be created.
6
Select the OS to install and click
[Next].
The [Configure your unattended Windows Installa-
tion] window appears.
7
Set items and click [Next].
The [Summary] window appears.
8
Confirm the settings and click [Start In-
stallation].
9
Click [Start now].
Installation starts.
1. If a message prompts you to insert Array
Controller Document & Tool CD, insert
the CD-ROM and click [OK].
2. If a message prompts you to insert Service
Pack CD-ROM, insert the CD-ROM and
click [OK].
3. For Windows Server 2003 x64, a message
displays and prompts you to insert Startup
Disc Win64 and restart the system. Insert
Startup Disc Win64.
10
When a message prompts you to insert
the OS CD/DVD, insert the CD/DVD
and click [OK].
After files are copied, a message prompts you to
eject the CD/DVD and floppy disk.
11
Eject the CD/DVD and floppy disk and
click [OK].
The system is restarted. And setup of OS GUI and
installation of LAN utility, Service Pack, and Ac-
tive Directory are performed automatically.
12
When a confirmation message to re-
start appears, click [Restart].
The system restarts and installs high reliability
tools.
Thus the Command Prompt windows may ap-
pear and the disappear during installation of
SreverView, the installation process is properly
proceeding.
13
Press the [Enter] key when a message
notifies completion of installation.
14
Restart the system.
Click [Start] - [Shutdown]. Select [Restart] and
click [OK]. The system restarts.
15
Settings for the RAID management
tool (ServerView RAID).
For detailed information and the setting procedures,
refer to the manuals in Array Controller Document
& Tool CD.
Settings of an array administrator account
-
Configuration of HDD Check Scheduler
-
This server is not equipped with LEDs which notify you
an error or a failure of the installed hard disk units. To re-
ceive an error or a failure notification in real-time, start up
ServerView S2 to complete the necessary settings. For
details on the setting procedures, refer to
Appendix C Setting Notifications for Events of Failures
4
"
User's Guide
".