Installing The Os - Fujitsu PRIMERGY TX300 S4 Start Manual

7

Installing the OS

This section explains how to install the OS by using ServerStart.
1
Turn on the server, and insert
PRIMERGY Startup Disc immediately.
ServerStart starts up. The select-media window for
the configuration file appears.
2
Insert the ServerStart floppy disk sup-
plied with the server. Click [Continue].
ServerStart initialization process starts. After com-
pletion, the license agreement window appears.
3
Click [Accept].
The [Welcome to ServerStart] window appears.
4
Select [Quick Installation], and click
[Next].
The [Select the Boot Controller and Boot Disk]
window appears.
5
Set configuration of the RAID and
disks, and click [Next].
To install the OS while maintaining the estab-
lished RAID environment
"
Select Logical Disk 0
to be created. One partition can be created.
"
Select Logical Disk 0
required to be created.
To configure RAID
"
Select create new RAID array with one partition
and specify the RAID level to be configured and
the size of the partition. All existing RAID will be
deleted. One partition can be created.
The [Please select the OS to install]
pears.
6
Select the OS to be installed, and click
[Next].
The [Configure your unattended Windows Installa-
tion] window appears.
",
and specify partition size
"
even if the RAID is not
",
window ap-
7
Set the items, and click [Next].
The [Summary] window appears.
8
Confirm the settings, and click [Start
Installation].
9
Click [Start now].
Installation starts.
When a message prompts you to insert Array
Controller Document & Tool CD
Insert the Array Controller Document & Tool CD,
and click [OK].
When a message prompts you to insert Service
Pack CD-ROM
Insert the Service Pack CD-ROM, and click [OK].
10
When a message prompts you to insert
the OS CD/DVD, insert the CD/DVD,
and click [OK].
For Windows Server 2008
1. Insert the OS CD/DVD (Installation disc).
Copying files starts.
After files are copied, a message prompts you
to eject the CD/DVD and floppy disk.
For Windows Server 2008 (64-bit), a
message appears and prompts you to insert
PRIMERGY Startup Disc again. Insert the
PRIMERGY Startup Disc. After files are
copied, a message prompts you to eject the
CD/DVD and floppy disk.
For Windows Server 2003 / Windows Server
2003 x64
Insert the OS CD/DVD (Installation disc).
1.
The license agreement window appears.
2. Click [Accept].
After files are copied, a message prompts you
to eject the CD/DVD and floppy disk.
For Windows Server 2003 R2 / Windows Serv-
er 2003 R2 x64
1. Insert the OS CD/DVD (Installation disc) Disc 1.
The license agreement window appears.
2. Click [Accept].
After files are copied, a message prompts you to
insert the Disc 2.
3. Insert the OS CD/DVD (Installation disc) Disc 2.
After files are copied, a message prompts you to
eject the CD/DVD and floppy disk.
11
Eject the CD/DVD and floppy disk, and
click [OK].
The system restarts. Setup of OS GUI and installa-
tion of LAN utility and Active Directory are per-
formed automatically.
4