Installing The Os And Bundled Software - Fujitsu PRIMEQUEST 2000 Series Manual
Configuring the san boot environment
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
Consideration of Windows Installation
4.1.2 Installing the OS and bundled software
The boot order can be changed according to the following procedure.
1.
After powering on the partition, press any key ([Space] key, for example) other than the [Enter] key while the
FUJITSU logo is displayed, to display the Boot Manager Front Page.
2.
Select the following items from the menu in the following order, on the Boot Manager Front Page:
[Boot Maintenance Manager] - [Boot Options] - [Change Boot Order] - [Change the order]
3.
Specify it as follows for the highest-priority device to boot from remote storage.
Case installed in UEFI BIOS mode : UEFI: Fujitsu Virtual CDROM0 1.00
Case installed in Legacy BIOS mode : Fujitsu Virtual CDROM0 1.00
4.
Specify [Commit Changes and Exit] - [Reset System] to reboot the partition.
C122-E206-04EN
FIGURE 4.1 [Change Boot Order] menu PRIMEQUEST 2000
99
Advertisement
Table of Contents
