Yeti Cycles 303 wc 2013 Owner's Manual page 4

the 303 wc is a pure
race machine, born anD
breD on the worlD cup
circuit with input from
our factory team.
1. CUstOm hyDrO-FOrmeD alUminUm main Frame & swinGarm
2. inset 1.5 heaD tUBe – anGleset COmpatiBle
3. inteGrateD FOrk BUmpers
4. patenteD 303 linear rail teChnOlOGy
5. remOvaBle isCG mOUnts
6. CUstOm DUal-Density Chain slap GUarDs
7. rear shOCk By FOx raCinG shOx
8.
1. the fully custom hydro-formed main frame and swingarm have
been maximized for stiffness and weight savings.
2. Using our new inset headtube on the 303 wC allows for a larger
headtube with more welding area and increased stiffness. it is also
angleset compatible, allowing for tweaks to the geometry of the
frame.
3. integrated and replaceable fork bumpers protect your frame and
fork without fail. no more worrying about keeping the rubber
bumpers in place on the fork stanchions.
4. Our patented linear rail technology smooths out even the most
technical races courses and allows the bike to pedal efficiently.
5. the splined BB shell can accept a removable isCG 03' or 05' tab.
the splined system is lighter than a conventional welded tab and
allows for a myriad of chain-guide options.
6. Custom chain-slap guards on the seatstay and chainstay keep
things quiet while riding and protect the frame.
7. the 303 wC uses a 3.0 inch stroke, 9.5 inch eye to eye shock, by
Fox racing shox that is easily accessible for tuning.
9.