Telephone operation
Options while on calls
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch-tone
dialing temporarily during a call. This is useful if you need to send touch-tone
signals to access your telephone banking or long distance services.
1. During a call, press TONE .
2. Use the dialing keys to enter the desired number. The telephone sends
touch-tone signals.
3. The telephone automatically returns to pulse dialing after you end the call.
Blind transfer
While on an outside call, you can transfer the call to a specific device or any
device without notifying them.
To transfer an outside call from a handset:
1. During the call, press MENU/
/�ELECT to choose Transfer.
2. Press
MENU
•
If you have one handset and no other registered devices,
the outside call is put on hold and your handset shows
Transferring call... The telephone base rings and shows
Transfer from HAND�ET X.
•
If you have
handset, your screen shows TRAN�FER TO: Use the
dialing keys to e e nter a specific device number (0 for the
telephone base, 1-9 for handsets 1-9,
by 0-2 for handsets 10-12, or TONE followed by #
for all devices),
desired device and press
call is put on hold and your handset screen shows
Transferring call... or Transferring call to all...
device rings and shows Transfer from HAND�ET X
(HAND�ET represents the handset name, X represents the
handset number).
3. To answer the call on the destination handset, press
/��EA�ER
��EA�ER. To answer the call on the telephone base, press
/��EA�ER
��EA�ER. The initiating handset shows Call transferred and goes to
idle mode.
�ELECT
other registered device(s) or
q
or press
CID
MENU
.
more than one
TONE followed
or p
to scroll to the
DIR
/�ELECT.
The outside
, press
43
Phone
6:30
AM
>Transfer
Intercom
TRANSFER TO:
>Handset
The other
�HONE/
FLA�H
, press
0:00:12
8/06
2
or