Getting started
Battery installation and charging
CHARGE light
After you install your telephone or power returns following a
power outage, the handset and telephone base will prompt
you to set the date and time. For instructions, see
�et date/time on page 15 or page 26. To skip setting the date
and time, press
the telephone base.
After the date and time setting is done or skipped, the
telephone base will prompt if you want to set up the
answering system. Press
answering system setup via voice guide. For more details,
see Voice guide on page 84. To skip the setup, press
CANCEL on the telephone base.
IM�ORTANT INFORMATION
•
Use only the supplied rechargeable battery or replacement battery (model BT183342/
BT283342).
To order, visit our website at
1 (800) 222-3111
•
If you do not use the handset for a long time, disconnect and remove the battery
to prevent possible leakage.
�tep 3
Charge the handset by placing it face forward
in the telephone base or charger. The CHARGE
light on the handset is on during charging.
/CANCEL on the handset or CANCEL on
OFF
/�ELECT to start the
MENU
.
In Canada, dial
www.telephones.att.com
1 (866) 288-4268
10
SET DATE
MM/DD/YY
SET TIME
HH:MM --
Voice guide to
set up Ans sys?
or call
.