Answering system
About the answering system
Voice prompts
The system provides voice prompts to guide you through the setup procedures
at the telephone base, message playback, remote access and recording
outgoing announcements.
Call screening
To screen a call at the telephone base:
If the answering system and call screening are on (see Call screening on
page 85), the announcement and the incoming message broadcast at the
telephone base when a call is answered by the answering system.
Options while a message is being recorded:
Press q/VOLUME/p on the telephone base to adjust the call
•
screening volume.
•
Press
/�LAY/�TO� or CANCEL to temporarily silence the
call screening.
•
Press
/�LAY/�TO� to temporarily turn on the call screening if call
screening is set to off.
/��EA�ER
��EA�ER to answer the call.
•
Press
To screen a call at the handset:
While a message is being recorded, the handset shows
To screen call, press [�ELECT]. Press
Options while a message is being recorded:
Press q
/VOLUME or p
•
CID
screening volume.
•
Press
/CANCEL to temporarily silence the call screening.
OFF
/�ELECT to temporarily turn on the call screening if call
•
Press
MENU
screening is set to off.
/��EA�ER
��EA�ER to broadcast the announcement and the incoming
•
Press
message through the speakerphone. Press again to turn off the speakerphone.
/�ELECT to screen the call.
MENU
/VOLUME on the handset to adjust the call
DIR
92