2A3/4
3-3-12 Large paper deck section
(42 ppm: optional/52 ppm: standard)
( 1 ) Detaching and refitting the upper and lower deck separation rollers
Clean or replace the upper and lower deck separation rollers as follows.
<Procedure>
1. Open the large paper feed deck.
2. Open the deck side cover.
3. Remove the stop rings.
4. Remove the one-way drum.
5. Clean or replace the upper and lower deck separation rollers.
6. Refit all removed parts.
Upper deck separation roller
One-way drum
Stop rings
Figure 3-3-119 Detaching and refitting the upper and
∗ Be sure to orient the one-way drum as shown in the above diagram.
3-3-102
Lower deck separation roller
lower deck separation rollers
One-way drum
Upper deck separation roller
Figure 3-3-120 Installing the one-way drum
Deck side cover