Image Is Out Of Focus; Image Center Does Not Align With The Original Center - Kyocera Mita KM-4230 Service Manual

(17) Image is out of focus.

Causes
1. Defective image scanning unit.
(18) Image center does not
align with the original
center.
Causes
1. Misadjusted image center line.
2. Misadjusted scanner center line.
3. Original placed incorrectly.
Causes
1. Defective image scanning unit.
Check procedures/corrective measures
Replace the image scanning unit.
Causes
1. Misadjusted image center line.
2. Misadjusted scanner center line.
3. Original placed incorrectly.
Check procedures/corrective measures
Readjust the image center line (see page 3-
3-19).
Readjust the scanner center line (see page
3-3-38).
Place the original correctly.
2A3/4
3-6-13