Manual Ip Configuration - Siemens Gigaset Owner's Manual

Manual IP Configuration

1. Check Specify an IP address on the IP Address tab. Enter an IP address based on
the default network 192.168.2.x (where x is between 2 and 254), and use
255.255.255.0 for the subnet mask.
2. On the Gateway tab, add the IP address of the Gigaset Router (default:
192.168.2.1) in the New gateway field and click Add.
3. On the DNS Configuration tab, add the IP address for the Gigaset Router and click
Add. This automatically relays DNS requests to the DNS server(s) provided by your
ISP. Otherwise, add specific DNS servers in the DNS Server Search Order field and
click Add.
4. After finishing TCP/IP setup, click OK, and then reboot the computer. After that, set
up other PCs on the LAN according to the procedures described above.
Configuring Client TCP/IP
81